Prusa MK3/MK3S/MK3S+ MMU2/MMU2+ Acrylic Enclosure Box Case Cover Kit

Description

Note:  This enclosure case is specifically for the stock Prusa MK3/MK3S/MK3S+ with
MMU2/MMU2+ installed
.  If you want to handle the .  (Although it will work fine with your printer with no MMU2 installed.)
Have you
r?  Let
The Prusa MKS line has the capabilities, fit, finish, and attention to detail of a much more expensive printer. In a market awash with inexpensive printers full of crappy parts that wear out quickly, everything about the Prusa i3 is quality. Its hot end can print anything, there's a best-in-market removable bed, and the slicer is tuned to make the most of the printer.
The only thing the Prusa lacks is an enclosure to make full use of its capabilities. Our Prusa enclosure
box/case/cover retains the offensive odors and air contaminates from melting plastics and creates better-looking prints to boot.
This product is a professional-grade, cool-looking enclosure you can assemble in about an hour and works with a stock Prusa MK3: no modifications needed.
Advantages of adding a 3DUPfitters enclosure:
A controlled temperature creates better quality prints
Provides outside air to the power supply with no modifications to the printer
More flexibility to print different types of filaments, including ABS
Optional fume filter or vent to the outside (both sold separately)
Thick 6mm acrylic doors and 3mm sides
The enclosure works by retaining the bed's heat to bring the ambient temperature up high enough, stabilizing ABS and other filaments that expand when they cool. The optional fan will draw cold air across the power supply, simultaneously heating the air and cooling the supply. The heated air circulates within the enclosure, providing a steading temperature. The expelled air can be vented into the room, sent through an optional air filter (not included), or vented to the outside via a hose. (not included)
Multimaterial Unit (MMU2S) Support
The MMU2S version of the enclosure fits your Prusa if it has an MMU2 installed
.
If you haven't received your MMU2 yet, the enclosure works just fine without it as well.
It even includes a regular spool holder so you can print without all of the complicated MMU parts.
We made this version much wider and deeper so that you can store all five spool holders and the filament detangler on top. To make sure the top can safely accommodate all five filament spools it's been doubled in thickness to 6mm.
Note that since the MMU2 spool holders and detangler holder are from Prusa we don't print them for you, but we did
for you to make it easier.
How it's Built
All of the plastic parts are 3D printed in ABS
to withstand the heat from the enclosure. The panels are cut on a US-made industrial laser and then flat packed for your assembly.   All you need for assembly is just a hex wrench and a small Phillips head screwdriver.  (not included.)
What's Included
MMU2 version:
23" (Deep), 22" (Wide), 20" (Tall), 13 lbs.
Fits the standard Prusa i3 MK3/MK3S with or without MMU2
Accommodates both the
Regular
6mm acrylic front panel with frame, doors, injection-molded hinges, magnetic latch, custom-designed latch mount in ABS, steel strike plates, and matching screws.
6mm top and pre-drilled holes for the spool holders and detangler.
3mm acrylic sides and top with access ports for cables and filament.
. The enclosure is designed to sit on a flat surface that acts as a bottom.
60x60mm 12.6 CFM USB-powered fan.  if you don't wish to vent.  (USB power supply not included.)
One hundred forty screws, nuts, bolts, all connecting plastic pieces, and miscellaneous parts.
Not Included
DOES NOT INCLUDE THE PRUSA 3D PRINTER!
Upgrade to an and fan to reduce fumes.
Upgrade the plastic knob to .
on the front or sides.
The will send potentially dangerous and odorous fumes outside.  We supply the fan and dryer hose adapter; you get the rest of the parts from your local hardware store.
Interior LEDs
Want something different?  Request a
Are you desperate enough to read the ?