New IRC800 Series IRC806 MWIR InSB Infrared LN Cooled IRCAMERA S +K IR Camera

Description

The technologically advanced (
IRC806 LN2 Cooled Mid Wave IR Camera SYS
) science grade camera utilizes an Indium Antimonide (InSb) focal plane array (FPA)
and provides unmatched sensitivity and ultra-low noise imagery with no blooming or crosstalk.
The IRC806 operates at up to 119 frames per second full frame, (475 Hz full frame with HS) and supports sub windowing for even higher frame rates.
The IRC806 features 640 x 512 pixel resolution at full window size, and includes Camera Link, Gigabit Ethernet and HDMI outputs.
The IRC806 is the perfect choice for the most demanding MWIR imaging applications including materials evaluation, quality assurance and spectroscopy.
Using the cost effective LN2 cooled Dewar assembly, the IRC806 infrared camera consumes low power and has no vibration due to cryocoolers.
The IRC806 offers easily changed cold filters and apertures making it perfect for prototyping system development or where application requirements may change.
Software options include WinIRC and a software developers kit to allow the user to acquire, display and analyze data from the IRC806 high definition camera.
The IRC800 Series cameras offer the ultimate in flexibility for research scientists.
Camera operators can vary integration times, frame rates and cold filters to meet the most precise testing requirements making the IRC800 the perfect instrument for prototyping system development or where application requirements may change.
A 1/3-liter LN2 pour-filled Dewar assembly maintains temperature for up to 20 hours unpowered and 9 hours powered which makes the IRC800 Series perfect for Scientific Imaging, Process Analysis and Quality Assurance.
A Software Developers Kit is available for users who wish to create their own applications.
IRC806 Specifications
Detector
Detector type
Indium Antimonide (InSb)
Spectral response
< 1.0µm to 5.0µm
Resolution (pixels)
640 x 512
Pixel pitch
20µm
Imaging Electronics
Frame rate @ max window size
119 Hz
Integration time
< 150 ns to full frame
Dynamic range
14-bits with 13-bit option to increase frame rate at small window sizes
Windowing
User defined in 4×1 increments; min width=320, min height=32
Integration type
Snapshot, automatic selection of integrate while read or integrate then read
Ultra low latency sync
Sync I/O, integration out
Image data
Simultaneous Camera Link & Gig-E
Communications
Serial over Camera Link & Gig-E
Software control
Cross platform GenICam compliant
Performance
NEdT
18mK
Well capacity (electrons)
7M
Operability
99.8%
LN2 hold time
> 8 hours typical, > 4 hours with optional cold filter wheel
Optics
Camera f/#
f/2.3, f/3.0 & f/4.0 standard; custom cold shields available on request
Cold filter
3.0µm – 5.0µm or no cold filter standard, optional CO2, SWIR or custom filters on request
Lens mount
Bayonet for 7, 13, 25, 50, 100 & 50/250 mm lenses; bolt hole pattern for non-standard lenses
Optional filter wheel
Motorized four position cold filter wheel; 25.4mm diameter x 1.0mm thick filters
General
Power @ 24 VDC
12 watts
System weight
< 7 pounds
Size
3.7″ x 8.1″ x 11.8″
Operating temperature range
-40C to +55C (-40°F to +131°F)
Storage temperature range
-55C to +80C (-67°F to +176°F)
Environmental rating
IP-51
Mounting holes
2x 1/4-20 & 4x #10-24
* This camera also includes a spare cold shield, F/4.0, 5 value.
Email or call for any questions.
This camera product described above is subject to the controls of
ITAR 22_CFR 121.1
.
Transfer of these products by any means to a foreign person or entity, whether in the US or abroad,
without appropriate export authorization, is prohibited and may result in substantial penalties.
You will be required to complete a BIS-711 end use agreement form to ensure that the
Thermal Imager product will not be exported internationally.
You may also be required to submit a U.S. passport (for citizenship verification).